Jerry cans are great for storing and transporting liquids, such as fuel, lubricant oils, cleaning agents, agro products and chemicals. These products are designed by the jerry can manufacturers in Bharuch to be durable, stackable and leak-proof. These manufacturers are also useful in safe handling and storage practices. If these drums are not used properly, it can cause spillages, fire hazards, container deformation, regulatory non-compliance and contamination.
Whether you aim to use the plastic or metal jerry cans, this guide will help determine the best practices, temperature guidelines and transport precautions you need to take. It is a great buyer checklist made by the manufacturer to ensure safety across all stages.
1. It is important to choose the right jerry can for the product you plan to store inside. For this purpose, you must choose the appropriate material. HPDE jerry cans are best for chemicals, agro inputs, cleaning fluids and food-grade liquids as well as non-inflammable substances. The metal jerry cans can help carry fuels like petrol or diesel easily. They are meant for fuels that are stored in high temperatures or where rough handling is normal. Jerry can manufacturers in Ankleshwar believe that you must check for UN certification while looking for drums to store hazardous or flammable liquids. Along with UN marking, you should also check for leak and drop test approval. It is equally important to check the venting capability in case of volatile substances. Lastly, check if they are compatible for the chemicals you are planning to store in them. It is crucial to check that the resin used in HPDE drum matches the aggressiveness of the chemical used. The wrong container can cause swelling, cracking or even permeation.
2. Follow the safe storage practices to ensure their long life and maximum safety. For this purpose, you should store them in a cool, shaded and ventilated area. In case the drum is stored under direct sunlight, it can increase internal pressure, increase container deformation and accelerate chemical reactions. According to the jerry can manufacturers in Bharuch, you should always store the cans in a well ventilated room, away from heat sources and on raised pallets. It is important to keep the containers sealed. An unsealed or loosely capped can can cause evaporation of the volatile compound and let the moisture inside. You should also avoid storing the containers near ignition sources. It is important to maintain a critical distance from electrical equipment and avoid open flames as well.
3. You need to keep in mind the temperature guidelines to maintain the safety and longevity of these cans. There is an ideal temperature range for most HPDE jerry cans. It is about 0-400 C to maintain safety. At higher temperatures, you may experience plastic softening and increase internal pressure. When the temperature goes to 45, the jerry cans expand, warp or even emit fumes. If the temperature is too low, the HPDE will become brittle and impact strength decreases. You should ideally avoid dropping or banging the containers when storing in the cold regions.
4. According to the jerry can manufacturers in Ankleshwar, improper stacking is also another reason to cause damage, leaks and workplace. That’s why you should follow the manufacturer’s stacking guideline.
